Free Essay

Study Material

In: Miscellaneous

Submitted By devilishnj
Words 856
Pages 4
Lovely message for a lovely person for a lovely reason at a lovely time from a lovely mind in a lovely mood in a lovely style…, now give and send me a lovely smile.

A sardar was climbing on tree. He saw a snake hanging on the tree. He told to the snake ‘ sirf latakne se height nahi badhegi… mummy ko bolo complan pilaye…

Utre jo zindagi ki gehraiyon mein hum…
Mehfil mein rehkar bhi rahe tanhaiyon mein hum…
Diwangee nahi toh aur kya kahe…
Insaan dhundte rahe parchaiyon mein hum…!

Simple music can make you sing,
Simple hug can make you feel better,
Simple things can make you happy,
Hope my simple ‘Hi’… will make u smile…!

It is said that when you laugh You are praying to God…
But when you make others laugh Then God himself prays for You…!

Aansu mein na dhundna hame… hum tumhe aankhon mein mil jayenge…
Tamanna ho agar milne kit oh band aankhon se bhi nazar aayenge…!

1 day a boy asked his girlfriend to marry him. The girl gave him the challenge to live a day without her…only then she will marry him. No communication was there between them for 24hrs. The boy didn’t know the girl had only 24hrs. left because she was seriously ill. After 24hrs. the boy went to the girl’s house holding a ring. He was surprised to know that she’s dead. She left a letter for him saying “ You did it and you can do it again and everyday, my love”.

Value of a relation is not how much one feels happy with someone, but it is the loneliness that one feels without that someone.

Law professor asks the student- “ Which is the most important law of finance for starting a new business ?”
Student replies- “ Father-in-Law”.

Encouraging thought: U don’t know how high you can fly, until you give a real good try, just do your best in each try, may the sky have to shift little high…!

Expecting much from whom you feel your own is not a mistake provided the one from whom you expect should also think you as their own…!

Do you want happiness in life… then never be beggars of love, always be donors of love.

Life is a collection of changes. So don’t avoid changes. Take every change as a challenge. Some give success and some act as the stepping stone to success.

The words that escape a friend’s mouth are: I’ll be there when you say you need me… but the words that are unheard from a true friend’s heart are: I’ll be there whether you say you need me or not.

The soul you love may not understand you…but, The soul which loves you does not know anything other than you…!

Care & Affection is not a business where you give when you get…
It’s a beautiful feeling for someone where you love to give even if you don’t get…!

Don’t misunderstand the person who shows anger on you… because anger is the most easiest and childish way to express the deep love in the relationship…!

Time moves on and later we regret for things not done, for words not said, for love not shown…,
Life is too short, do what makes you happy today…

As the day turns into night, keep your worries out of sight, no matter how tough the world may seem, you still deserve the…Sweetest Dream.

‘Hard Fact’- people say never expect anything in return from anyone, but the truth is when we really like someone, we naturally expect a little Care from them.

Prayer of an ideal daughter- Dear God, thanks for all the blessings you have bestowed upon me… I won’t ask anything for myself, please give my parents a really hot Son-in-Law…!

Yaad na karoge toh satayenge… Ruthoge toh manayenge… Udas ho toh hasayenge. ‘Dost’ hai hum, ‘Saaya’ nahi jo ‘Andhere’ mein ‘Saat’ chhor jayenge.

I have special sleeping arrangements for you- Bed of Trust, Pillow of Care, Bedsheet of Understanding, Blanket of Peace, and Dreams of Angel… Goodnight.

She is Hot! She is Sweet! She always needs a Lip for Kiss! Whole world is mad for her!
Who is She? Do you know Her?
‘Tea’… chai piyo … mast jiyo !

Kabhi laga ke wo hame sata rahe hain, Dusre pal laga ke wo karib arahe hain, Kuch log hote hai aanson ke tarah, Pata he nahi lagta sath de rahe hain ya chhod ke ja rahe hain…!

Haqiqat mein jina jab aadat ban jati hai… Khwabon ki duniya berang nazar aati hai… Koi intezaar karta hai zindagi ke liye… Aur kisi ki zindagi intezaar mein guzar jati hai…!

Achchi zindagi guzarne ke sirf 2 tarike hain… 1. jo pasand hai usey hasil karlo… ya phir 2. jo haasil hai usey pasand karlo

Gam mein jine mein bhi maza aata hai,
Garibon ke ghar bhi khuda aata hai,
Hum hai jo barish ki tarah SMS karte hai,
Aapka ek SMS sarkari nal mein pani ki tarah aata hai…!…...

Similar Documents

Free Essay

Using Material from Item a and Elsewhere, Assess the Strengths and Limitations of Participant Observation for the Study of Gender Relations in Schools.

...interaction, subject choice, achievement and identity. Gender relations affect many areas of school life, such as parents evenings governors meetings, senior management decision making, appointments and promotions, as well interactions in the classroom and staff room schools have gender equality policies. As a result, pupils and teachers may disguise their real attitudes towards gender and this may make it difficult for the researcher to get at the truth. Sociologists are interested in the reasons for gender differences in subject choice. These include primary socialisation in the home peer group pressure, subject images and gender career opportunities. Question: Using material from Item A and elsewhere, assess the strengths and limitations of participant observation for the study of gender relations in schools. There are two types of observation, covert and overt. The difference between them is that covert observation is when the people being observed do not know they’re being watched or studied, and overt observation is when they have been told and given consent to be observed by the researcher. Observation can also be done in two ways. This is called participant and non-participant observation. In participant observation the observer joins a group and observes their activities, while at the same time taking care to observe what is going on. Often that means writing notes and reflections later on.   In Non Participant observation, the sociologist......

Words: 488 - Pages: 2

Free Essay

April 2013 Current Affairs Study Material

...April 2013 Current Affairs Study Material INTERNATIONAL China, Russia, Pakistan discuss Afghanistan situation Officials from China, Russia and Pakistan on 3 April 2013 held talks on the issue of coordination between their positions on Afghanistan.The officials from three nations backed the Shanghai Cooperation Organisation (SCO) that is grouping to play a great role in Afghanistan after the withdrawal of NATO Forces in 2014. These talks were held to enhance coordination. The talks followed a similar meeting India, China and Russia held in Moscow recently, reflecting the delicate balancing act — and increasingly complicated regional dynamics — as different countries look to push their interests in the lead up to 2014. Malaysia PM Dissolves Parliament On 3 April Malaysian Prime Minister Najib Razak has dissolved the Parliament ahead of a general election.This dissolution will pave the way for the 13th general election.The elections have to be held before June 2.The Barisan Nasional coalition that has ruled Malaysia since independence in 1957 is expected to face a stiff challenge in the polls from the opposition three-party Pakatan Rakyat (People’s Pact). Tammam Salam named as Lebanon new Prime Minister On 6 April well-known Sunni lawmaker Tammam Salam has been named Lebanon’s new prime minister , after receiving overwhelming parliamentary support.His appointment comes after previous prime minister Najib Mikati resigned and effectively brought down his......

Words: 13017 - Pages: 53

Free Essay

Study Material Onsocial Science

...Kendriya Vidyalaya Sangathan 18, Institutional Area, Shaheed Jeet Singh Marg, New Delhi - 110 602. SUPPORT MATERIAL YEAR 2012-13 SUPPORT MATERIAL CLASS X – Social Science Chief Patron Shri Avinash Dikshit Commissioner KVS, New Delhi Patron Shri J.M Rawat Deputy Commissioner KVS, Jaipur Region Guidance Sh.K.R Choyal Assistant Commissioner KVS, Jaipur Region Sh. Dr. R.K Agarwal Assistant Commissioner KVS, Jaipur Region Convener Ms. Urmil Meena Principal, K.V. No. 1, Alwar Prepared By Mrs. P. Dixit Principal K. V. No. 4, Jaipur Mr. Anil Kumar Daila TGT (S.ST.) K. V. No. 1, Alwar Mrs. Veena Michael TGT (S.St.) K. V. No. 5, Jaipur Mr. D.C. Garg TGT (S.St.) K. V. Zawar Mines Mr. Manoj Singh TGT (S.St.) K. V. No. 1, Alwar Mrs. Sunila Thapar TGT (S.St.) K. V. Phulera Reviewed by Shri U.R Meghwal Convener Principal K.V Bhilwara Shri M.M. Sharma PGT (History) K.V Nasirabad Shri...

Words: 31003 - Pages: 125

Premium Essay


... Ramadan ELgamsy What Are Materials? Substances out of which all things are made What materials are present in the classroom? Dr. Ramadan ELgamsy Material History Materials continue to change the world. Advancements in materials, technology, and science create continued advancement possibilities for Materials Advancements Dr. Ramadan ELgamsy Material Composition Elements Consist of only one type of particle or atom Cannot be broken down Criteria for element classification Based on individual properties Grouped according to shared properties Dr. Ramadan ELgamsy Material Composition - Elements Classification of Elements Divided into three categories based on Physical Properties – Boiling point, melting point, density, color, hardness, and texture Chemical Properties – Reactivity to acid, oxygen, and flammability Elements Metals Nonmetals Dr. Ramadan ELgamsy Metalloids Material Composition - Elements Metal Elements Distinguishing Characteristics Good conductors of heat and electricity, hard, shiny, reflect light, malleable, ductile, typically have one to three valence electrons Dr. Ramadan ELgamsy Material Composition - Elements Nonmetal Elements Distinguishing Characteristics Most are gases at room temperature Solids are dull, brittle, and powdery; electrons are tightly attracted and restricted to one atom; poor conductors of heat and electricity Dr. Ramadan ELgamsy Material Composition -......

Words: 874 - Pages: 4

Premium Essay

Modern Materials Corporation Case Study Analysis

...Modern Materials Case Study – III-7 In 1991 through mergers and acquisitions Modern Materials, Inc. was established. They manufacture products that are used as raw materials by large manufacturing companies and the construction industry. After the merger in 1994 in an effort to retain both Information Services, they outsourced the department to STC. Woodson was hired in 1995 to help improve the company’s competitive position and profitability. His plan was to improve customer service by improving supply chain management. Modern Materials, Inc. Information Services staff were all hired by STC as a part of the contract. Except for the change in management in Information Services, other operations remained unchanged. Harvey Wooden was hired in 1995 as vice president of quality by Modern Materials, Inc. His aim was to improved Modern Materials, Inc. customer service thus improving the company’s competitive position and increasing profit. In 1996 Woodson proposed a Supply-Chain Management System Project that would significantly improve its business processes and fully support the company’s information systems. The project got approved in 1998 and was scheduled to be completed in 2001. Woodson outsourced the project to a company named UCA. UCA began to lead the project and define the requirements and program specifications for the new system. The project was expected to cost $60 million. However, just as the project got started the industry was hit with a downturn, and...

Words: 1388 - Pages: 6

Free Essay

Material Handling

...How to solve the limitations of the current system. Material handling equipment is about roles in moving, storage, and control of the goods. The categories of material handling are traditional and modern. 1. Traditional (i) Used human power (ii) Not value adding (iii) Minimize used of since it depend on the capabilities of the human to handle the risk 2. Modern (i) Used robotic system/ computerise system (ii) Adding value (iii) Maximize flexibility of used Detection systems and RFID-based automated material handling is now available and common to many of these industries are particularly flatbed conveyor. MHS based flatbed conveyor systems bring themselves to control complexity, additional storage equipment such as baskets and trays and additional user activity. The meat processing industry in the UK has refused to adopt the system because of the cost of installation if there is no commercial benefit in a financial decline through food fear accompanied by potential incompatibility between the issues of system reliability and the imposition of additional stress operator. Based on time constraints, the research has been conducted on the MHS can solve the limitations of the current system. Therefore, a consortium project called Meatract, was established to research and develop novel MHS automatically detect and track cuts in the......

Words: 747 - Pages: 3

Free Essay


...PDES1155 –Materials Technology | Process Selection Assignment | Garden Spade | mn13er 8/3/2012 | Sketches of Components and Statement of Materials Component 1 – Handle From the Materials Selection Assignment, I identified that the mpst suitable material for the Handle to be made from would be PVC due to it having a relatively high young’s modulus, a very low price and it being lightweight. Component 2 – Shaft For the shaft, the most suitable material identified for it to be made from would be Oak due to its price, and leightweight characteristics as well as it having a relatively high young’s modulus. Component 3 – Blade CES Edupack identified silicon carbide to be the most suitable material for the blade to be made from due to it having wear and corrosion resistant parts, as well as a high young’s modulus. Estimates of Component Dimensions In the materials selection assignment, I conducted some research into the average measurements of spade components. From this I got an idea of some measurements I could use for my spade.You need to state your assumptions and show your working where you have calculated these. Component 1- Handle The average dimensions of a garden spade handle is 20cmx12cmx6cm (HxWxD) Component 2 – Shaft The average length of a garden spade shaft is 690mm Typically shafts are oval or circular hollow sections and a typical diameter value would be 29mm reflecting the interaction of the hand gripping the shaft...

Words: 833 - Pages: 4

Premium Essay

Material Deprivation

...1) Explain what is meant by ‘material deprivation.’ Material deprivation refers to the inability for households or individuals to afford these consumption goods and activities that are typical in a society as a given time regardless of people’s preferences with respect to these items. 2) Identify three government policies that may have reduced social class differences in educational achievement. * EMA – Educational Maintenance Allowance: The scheme was created to offer an allowance to those on college to encourage them to continue with the education system. An additional benefit of this was to potentially enable those on low incomes to afford to continue with an education in reference to travel and resources. * Sure Start – Sure Start aims to work with parents to promote intellectual, social and physical development of babies and other young children. They do this by offering family support, health care and advice alongside play sessions for the children. * National Curriculum – This is aimed to reduce the social class differences because everyone is taught the same subjects which is perceived to give the same equal chances across the board. 3) Using materials from item A and elsewhere, assess the importance of cultural factors in causing social class differences in educational achievement. Pupils in education from a working class background (a pupil whose background includes a far more manual job) have a tendency to underachieve in education......

Words: 1324 - Pages: 6

Premium Essay

Pgdm Mba Material Case Study- Cola Wars Continue Coke and Pepsi in the Twenty-First Century

...9/8/2015 PGDM/MBA Material: Case Study- Cola Wars Continue: Coke and Pepsi in the Twenty-First Century Home Human Resource Marketing Information system management Images You are visitor # Case Study- Cola Wars Continue: Coke and Pepsi in the Twenty-First Century 110,588 Search This Blog Translate Select Language  ▼ Category Assignment Business Communication Business Environment Business Law Case Study Compensation MAnagement E- Business Summary: "Cola Wars Continue: Coke and Pepsi in the 21st Century” explains the economics of the soft drink industry and  its  relation  with  profits,  taking  into  account  all  stages  of  the  value  chain  of  the  soft  drink  industry.  By focusing on the war between Coca‐Cola and PepsiCo as market leaders in this industry – with a 90% market share  in  carbonated  beverages  –  the  study  analyses  the  different  stages  of  the  value  chain  (concentrate producers,  bottlers,  retail  channels,  suppliers)  and  the  impact  of  the  modern  times  and  globalization  on competition and interaction in the industry. Analysis: It is quite clear that there was a “war" between Coca‐Cola and PepsiCo: not only have they been rivals for entrepreneurship For your Information Formates Human Resource Management Human Resource Mangement Human resource Planning Indian Labour Law Industrial Relation Information system Management International......

Words: 1069 - Pages: 5

Premium Essay


...2 Materials BASIC CONCEPTS AND FORMULAE 1. Maximum Level: It indicates the maximum figure of inventory quantity held in stock at any time. 2. Minimum Level: It indicates the lowest figure of inventory balance, which must be maintained in hand at all times, so that there is no stoppage of production due to non-availability of inventory. 3. Re-order level: This level lies between minimum and the maximum levels in such a way that before the material ordered is received into the stores, there is sufficient quantity on hand to cover both normal and abnormal consumption situations. 4. Danger level: It is the level at which normal issues of the raw material inventory are stopped and emergency issues are only made. 5. ABC Analysis: It is a system of inventory control. It exercises discriminating control over different items of stores classified on the basis of the investment involved. Items are classified into the following categories: A Category: Quantity less than 10 % but value more than 70 % B Category; Quantity less than 20 % but value about 20 % C Category: Quantity about 70 % but value less than 10% 6. Two bin system: Under this system each bin is divided into two parts - one, smaller part, should stock the quantity equal to the minimum stock or even the re-ordering level, and the other to keep the remaining quantity. Issues are made out of the larger part; but as soon as it becomes necessary to use quantity out of the smaller......

Words: 15325 - Pages: 62

Free Essay

An Experimental Study of Diesel Engine Cam and Follower Wear with Particular Reference to the Properties of the Materials

...Wear 240 Ž2000. 168–179 www.elsevier.comrlocaterwear An experimental study of diesel engine cam and follower wear with particular reference to the properties of the materials J. Michalski ) , J. Marszalek, K. Kubiak Faculty of Mechanic Engineering and Aeronautics, Rzeszow UniÕersity of Technology, 35-959 Rzeszow, ul. W. Pola 2, Poland ´ ´ Received 9 August 1999; received in revised form 17 February 2000; accepted 17 February 2000 Abstract The main objective of this paper is to study and experimentally quantify the cam and follower wear mechanisms of a diesel direct valve-gear. Camshafts are made of nodular cast iron, surface hardened, ion nitrided and nitrosulphurized, and those made of grey chilled cast iron are mated with followers made of chilled grey cast iron and hardened steel. The investigation was carried out on a laboratory bench equipped with an engine head with a camshaft, followers and systems creating the conditions necessary for a routine run of the valve gear. Cam wear was defined by comparing the profile lifts of the cams. The height of the followers was measured using a coordinative measuring machine and a perpendicular optimeter. The rotational speed, valve displacement and the torque required by the valve gear were measured. Camshaft C9 and the thimble shaped followers with regulating plates F6 were also examined in a diesel engine. The effects of the materials the kinematic pair was made of, heat treatment and thermochemical treatment,...

Words: 6535 - Pages: 27

Free Essay


...CHAPTER 2 CONCRETE LEARNING OUTCOME: By the end of this session, the students SHOULD BE able to: Explain the basic science and engineering fundamentals pertaining to classification,properties, advantages and disadvantages of concrete. INTRODUCTION  Concrete is most widely used as construction material.  Obtained by mixing – cement, water + aggregates (sometimes admixtures in required proportions)  These mixture then placed in forms and allowed to cure and becomes hard like stone.  The hardening is caused by chemical reaction between water and cement and its continues for a long time, and consequently the concrete grows stronger with age. INTRODUCTION (cont.) • The strength, durability and other characteristics of concrete depend: o Properties of its ingredients o Properties of the mix o Method of compaction o Other controls during placing, compaction and curing CLASSIFICATION OF CONCRETE  It is usual to specify a particular concrete by the proportion (by weight) of the constituents and their characteristics.  Example, 1:2:4 concrete refers to particular concrete mixed of cement, sand and coarse aggregate in a ratio 1:2:4 (with a specified type of cement, water cement ratio & max. size of coarse aggregate).  Concrete can be classified either: o Prescribed mix concrete or o Designed mix concrete -Depending on the specifying requirements of the desirable properties of concrete (strength, workability, durability......

Words: 836 - Pages: 4

Free Essay

Using Material from Item a and Elsewhere, Assess the Strengths and Limitation of Experiments for the Study of Labeling in Schools (20 Marks)

...want to know whether labeling occurs. They also want to measure its effect on pupils’ self-esteem and achievement. Using material from Item A and elsewhere, assess the strengths and limitation of experiments for the study of labeling in schools (20 marks) Using experiments for studying the theory of labeling in schools can have many strengths and limitations, included in practical, ethical and theoretical factors. The labeling theory is the idea that categorizing group or individuals can seriously affect their behavior. Two types of experiments – fields and laboratory, can investigate the effects of this theory. Interpretivists typically use field experiments as they’re taken place in a more natural environment, such as a school; which are usually real life situations. They can also extract qualitative and valid data, meaning you can look deeper into the truth behind the study of labeling on children in schools. However there is lack of scientific credibility and so there isn’t any identified or controlled variables. Experiments are unlikely to be used by interpretivists. On the other hand, positivists are more likely to use lab experiments because they’re reliable. They are very scientific and are also quantitative research, so it is easier to measure and identify cause and effect of behavior patterns of the children’s responses to the study of labeling. Lab experiments have full control over controlled variables and so they’re easy to replicate. However it is......

Words: 1096 - Pages: 5

Premium Essay

Fin316 Study Materials

...the risk that the issuer of the bond (i.e. the borrower) will default. Default is defined as not making interest payments. - U.S. Treasuries are said to be “risk-free” as our national government will not go bankrupt. - The difference between the yield on a corporate bond (which is risky) and a Treasury bond is the default premium. The default premium is the additional compensation required for taking on the risk of default. 14. Bond ratings – general ideas from the table showing S&P and Moody’s ratings, high/low risk, high/low returns, expensive/cheap money Standard & Poor's and Moody's are the best-known and most influential credit rating agencies. Their role as raters is to assess the risk of certain bonds through the study of all information provided to the public, and to assign to the issue and issuing company grades that accurately reflect the company's ability to meet the promised principal and interest payments. Bond prices and interest rates are broadly determined by bond categories (zero-coupon, convertible, income, for example). But an issue's exact pricing and coupon are determined by a credit rating. While S&P warns investors that a credit rating is not a recommendation to purchase, sell or hold a particular security, their initial ratings, and revised downgrades and upgrades, greatly affect the attractiveness of the issuance in the eyes of both issuers and holders. Bonds with higher ratings offer lower yields and easier money......

Words: 1977 - Pages: 8

Premium Essay

Sociology -Using Material from Item a and Elsewhere, Assess the Strengths and Limitations of Participant Observation for the Study of Labelling in Schools (20 Marks)

...people know they are being observed and act differently than they normally would in that situation. It is very difficult to carry out covert observation of educational settings, especially classrooms. This is because there are few cover roles the researcher can adopt and because he or she stands out as being much older than pupils. This means that most classroom observation has to be overt. However, this makes it very difficult to avoid the Hawthorne effect, where the presence of the researcher influences the behavior of those being observed. Participant observation studies of education tend to lack reliability. This is because data recording is often hard to replicate. Also, the personal characteristics of observers, such as their age, gender and ethnicity, mean that pupils may react differently to different researchers. In conclusion, there are many strengths and limitations of participant observation for the study of labelling in schools....

Words: 407 - Pages: 2