Packaging Management - Analyze How the New Packaging System Was Different from That of the Old System

In: Other Topics

Submitted By casestudyhelp365
Words 2250
Pages 9
Need Answer Sheet of this Question paper, contact

aravind.banakar@gmail.com

www.mbacasestudyanswers.com

ARAVIND – 09901366442 – 09902787224

PACKAGING MANAGEMENT

Attempt any four cases

Case No 1 Stretchable Tape

3Mâ€TMs Scotch Brand TM Stretchable Tape (ST) is a 4 or 6 mil Linear Low
Density Polyethylene (LLDPE) backing with a solvent less adhesive. ST is a load stabilization product which can provide reductions in raw materials and waste disposal costs while maintaining a stable, breathable load. ST utilizes 3Mâ€TM5 patented Stretch Release adhesive technology which will not damage high intensity graphic boxes.
3Mâ€TMs Scotch Brand TM Stretchable Tape was tested and proven to conform, by an Independent Testing Facility, to ASTM D4 169–Standard Practice for Performance
Testing of Shipping Containers and Systems.

Background
A meat packing house was packing 48 to 50 lb. of hams into a 10” high box. These boxes were interlock stacked 7 layers high on a 40” x 48” pallet. They were using stretch film and corner boards to stabilize the load for transport to an off site blast freezer. At the blast freezer the stretch film and corner boards were removed to improve cold air flow to the hams and reduce freezing time. After the blast freezer, the pallet was rewrapped with stretch film and corner boards and sent to distribution warehousing. The reason the meat packer is investigating ST is to reduce raw material cost, application cost, and waste disposal cost.

Waste and Cost Savings

3M†TMs Stretchable Tape (ST), #8886, was used to stabilize the pallet loads of hams after final packaging. Because ST allowed air flow through the pallet load, it is not required to be removed during the blast freezer process. The average amount of stretch film per pallet load was 15.7 oz. Because each pallet was wrapped twice, the total…...

Similar Documents

Packaging

...Packaging and purchase decisions ABSTRACT - The importance of packaging design as a vehicle for communication and branding is growing in competitive markets for packaged food products. This research utilized a focus group methodology to understand consumer behaviour toward such products and how packaging elements can affect buying decisions. Visual package elements play a major role, representing the product for many consumers, especially in low involvement, and when they are rushed. Most focus group participants say they use label information, but they would like it if simplified. The challenge for researchers is to integrate packaging into an effective purchasing decision model, by understanding packaging elements as important marketing communications tools. Propositions for future research are proposed which will help in developing better understanding of consumer response to packaging elements. Introduction: packaging at the point of sale Packaging seems to be one of the most important factors in purchase decisions made at the point of sale (Prendergast and Pitt, 1996), where it becomes an essential part of the selling process (Rettie and Brewer, 2000). Packaged food products are moving into ever larger supermarkets and hypermarkets, and there is a proliferation of products, offering consumers vast choice. The competitive context is ever more intense, both in the retail store and household. With the move to self-service retail formats, packaging increases its key......

Words: 2185 - Pages: 9

Changes in Foodservice Resulting from Management Information Systems

...Changes in Foodservice Resulting from Management Information Systems By George Stipe April 27, 2012 Management Information Systems Professor: Dr. Fish The food service industry started in 500 BC with the [1]“Ta Dionisiaka” banquets dedicated to the God of wine in Ancient Greece and run up to present day. In the 1980s restaurant operators still used facsimile machines or phones to place orders. In the early 1990’s fax machines were starting to be cost effective. Then in the late 1990s and early 2000s personal computers took food service ordering to a new level. The greatest advancement in technology in the food service industry started in the time period of the 2000s. These were the IT and web based technologies that revolutionized how restaurants do business. These new technologies have given restaurants a competitive edge they need to become more profitable. These technological advances address the five key areas of food service operations management: ordering, receiving, inventory, recipes, menus, and food safety. Food Service Ordering Restaurant managers use different strategies for their purchases. Most food suppliers have interactive web sites where any amount can be ordered and put in when they need their products. This allows the food service managers to practice what is called just-in-time purchasing, which is a finely tuned......

Words: 2993 - Pages: 12

Packaging

...CONSUMER BEHAVIOR TOWARDS THE NEW PACKAGING OF FMCG PRODUCTS Mitul Deliya Assistant Professor, S. K. College of Business Management, Hemchandracharya North Gujarat University, Patan Email: deliya.mitul@gmail.com ABSTRACT The importance of packaging design as a vehicle for communication and branding is growing in competitive markets for packaged FMCG products. This research utilized a focus group methodology to understand consumer behavior toward such products. The challenge for researchers is to integrate packaging into an effective purchasing decision model, by understanding Consumer’s behavior towards the packaging of FMCG products. When consumers search for and process information in-store, the product's package can contain relevant and useful information for the consumer. Product packaging forms the end of the 'promotion-chain' and is close in time to the actual purchase and may therefore play an important role in predicting consumer outcomes. Packages also deliver brand identification and label information like usage instructions, contents, and list of ingredients or raw materials, warnings for use and directives for care of product. INTRODUCTION “Packaging is the container for a product – encompassing the physical appearance of the container and including the design, color, shape, labeling and materials used” Packaging has a huge role to play in the positioning of products. Package design shapes consumer perceptions and can be the determining factor in......

Words: 4891 - Pages: 20

Quality Food Packaging

...Running Head: QUALITY OF FOOD PACKAGING: ENHANCING HORMEL’S FRESH DELI PACKAGING METHODS Quality of Food Packaging: Enhancing Hormel’s Fresh Deli Packaging Methods Pierre A Daoud psdaoud@gmail.com 480-241-9480 Keller Graduate School of Management Author Note This project paper was prepared for GM 588, Section E, taught by Professor Russell Roberson, Ph. D. February 2012 The Hormel Foods Corporation, currently a Fortune 500 company, has a history of American authenticity. It all began when George Albert Hormel opened a butcher shop in Austin, MN back in 1887. The key historical points in time, as explained by About Hormel Foods (2012) are presented as follows: in 1891 George Hormel established the company as Geo A Hormel and Co in Austin, MN. In 1913 the company expanded to Chicago and then in 1916 to Dallas, and then to Atlanta in 1918. 1926 marked the development of the first canned ham. George’s son Jay became acting president and took over day-to-day operations in 1927 after his father had retired. In 1937 a new innovative product called Spam was introduced into the markets for the first time. In the 1970s and 1980s, manufacturing plants were growing rapidly. A new plant equivalent to 23 football fields opened its doors in 1982, this facility comprised state of the art technology in processing foods. An important marker was in 1986 when Geo A Hormel......

Words: 4340 - Pages: 18

Analyse from a Management Information System Perspective, How Airasia 's Online System Has Brought Them Its Competitive Advantge

...ASSIGNMENT ON MANAGEMENT INFORMATION SYSTEM Air Asia has passengers that have reached more than 50 million passengers by now. This achievement s would not have been possible if not through IT technology, management and organization combined effort. Unlike MAS that provided costly but quality service, Air Asia provides quality and cheap service. These actions are accomplished not just through the strategic steps undertaken by Air Asia’s management but by the right use of information system in its organization. The online ticket reservation system is one example of how information system is applied with technology to achieve its goal of its organization. The online sales are no longer done through agents but through websites in the internet and therefore its easy and accessed worldwide. The number of clients increased in huge number due to easy access through the websites as transactions are done online. The operational management level to the executive level never lose out in keeping their communication intact. The information system manager have kept track by giving the right information to the executive and decision support officers and at the same time making sure of the cheap cost of the flight as well which is not easy to do at this competitive age. Air Asia can use management information system in other areas as well. It can employ both traditional as well as IT technology to further improve its services. I recommend that a person is employed to meet their potential......

Words: 380 - Pages: 2

Management Information System

...Contents Beximco Pharmaceuticals Ltd: 3 Historical background of Beximco Pharmaceuticals Ltd. 4 Mission: 4 Vision: 5 Our Services: 5 Beximco Pharma’s Contribution: 5 Beximco Pharma products: 5 Blockbuster Products of BPL: 6 Other products: 6 Supply Chain: 7 Supply Chain strategy: 7 Supply Chain Management: 8 Implementation of Supply Chain Management: 9 SCM life cycle of Beximco Pharma: 9 1. PLAN: 9 Functions of Production planning 10 2. SOURCE 11 3. MAKE 11 List of Machineries used in liquid Section in Beximco Pharma: 12 Machineries Used in BPL: 13 4. DELIVER 14 QUALITY ASSURANCE: 14 QUALITY ASSURANCE IN INFUSION UNIT: 14 Departments of Beximco Pharmaceuticals Ltd: 15 Major Operational Departments of Beximco Pharma: 16 Types of organizational structure: 17 SCM Integrated solution of Beximco Pharma Ltd: 17 Organizational Structure: 18 Supply Chain Diagram in BPL: 19 Some of the Software’s of BPL: 20 SCM Functional Process of BPL: 22 Warehouse Operation in BPL: 22 Portion of a warehouse: 23 Inventory management: 24 Labeling: 24 Transportation & Shipment: 26 Production logistics: 27 Quality Control 28 Working Division of Quality Control Department 29 Recommendation: 31 Conclusion: 32 References: 33 Beximco Pharmaceuticals Ltd: Beximco Pharmaceuticals Ltd. belongs to Beximco......

Words: 4670 - Pages: 19

Packaging

...Lucerne University of Applied Sciences and Arts School of Art & Design BA Design Management, International BACHELOR THESIS SUSTAINABLE PACKAGING Sustainable packaging A comprehensive approach towards sustainable packaging with a focus on primary packaging of food and drinks Lucerne, May 2010 CLAUDIO BECKER | BA DESIGN MANAGEMENT, INTERNATIONAL Lucerne University of Applied Sciences and Arts School of Art & Design BA Design Management, International BACHELOR THESIS SUSTAINABLE PACKAGING DESIGN MANAGEMENT ENABLES COMPANIES TO DEVELOP NEW BUSINESS DIMENSIONS THAT DRIVE A COMPREHENSIVE APPROACH TOWARDS SUSTAINABLE PACKAGING Lucerne, May 2010 Tutor EMETM Daniel Aeschbacher, Tutor and Faculty Member, Design Management, International Claudio Becker Baselstrasse 47, CH - 6003 Luzern Cell-phone: 0041 78 659 59 36 E-mail: info@claudio-becker.ch CLAUDIO BECKER | BA DESIGN MANAGEMENT, INTERNATIONAL TABLE OF CONTENTS Abstract 1. Introduction 2. Reference to design management 3. State of the Art 3.1 The context 3.2 Introduction to packaging 3.2.1 The fundamentals of packaging 3.2.2 The packaging design process 3.3 Sustainable packaging 3.3.1 What is sustainability? 3.3.2 What is sustainable packaging? 3.3.3 Materials 3.3.4 Barriers & drivers 3.4 Practise examples 3.4.1 Company overview 3.4.2 Comparison 4. Analysis / Synthesis 4.1 Insights 4.2 Sustainable packaging criteria 4.3 Recommendations 4.4 Conclusion Bibliography Books Reports......

Words: 12905 - Pages: 52

Packaging Methodologies

...FINAL REPORT: The role of packaging in minimising food waste in the supply chain of the future Prepared for: CHEP Australia June 2013 Issue: Version: 3.0 3.0 Authors: Dr Karli Verghese Dr Helen Lewis Simon Lockrey Dr Helen Williams Executive summary CONTACT Centre for Design School of Architecture and Design RMIT University GPO Box 2476 Melbourne VIC 3001 Tel: + 61 (03) 9925 3484 Fax: + 61 (03) 9639 3412 ACKNOWLEDGEMENTS Dr Stephen Clune’s (RMIT) background work into food waste and input into project scope. The research team are also grateful to the stakeholders from the food and packaging supply chain who participated in the interviews. Final report: The role of packaging in minimising food waste in the supply chain of the future Version: 3 Page 1 Executive summary Table of Contents Research Partners ................................................................................................................................ 3 Executive Summary .............................................................................................................................. 4 1 Introduction – the significance of food waste and the role of packaging ........................................ 6 1.1 Research aims and approach .................................................................................................... 6 1.2 Research method ..............................................................................................................

Words: 22044 - Pages: 89

Bayonne Packaging

...Amsterdam MBA Operations & Supply Chain Management Bayonne Packaging, Inc. HBS brief case 4420 March 5, 2013 Gulcin Askin Michelle Donovan Kivanc Ozuolmez Peter Tempelman 1 The answers in this report relate to the questions given in the document ‘Case 1: Bayonne Packaging, Inc.’ Question 1: Operations Performance of Bayonne Packaging 1A. How would you define the Operations Strategy of Bayonne Packaging? The operations strategy of a company is the prioritization of the five key performance measures: cost, quality, speed, dependability and flexibility. The president of Bayonne Packaging, Inc. indicates that the problems of the company are: they have incurred their first losses since 2001, there are complaints about quality and they are delivering late more often. The other department managers, except for the absent Finishing department manager, also indicate to the new vice president of operations that they have problems in their departments that relate to the performance measures dependability, quality and speed. Based on the priorities given by the key personnel of Bayonne Packaging we have determined the operations strategy of Bayonne Packaging to be as follows (key performance measures in descending order of importance: 1. Dependability 2. Quality 3. Speed 4. Costs 5. Flexibility 1B. How can Bayonne Packaging, Inc.’s Operations & Supply Chain performance be quantified? Per Key Performance Measure we have determined the following ways......

Words: 2844 - Pages: 12

How Packaging Influence Consumer Behavior

...International Business Research; Vol. 8, No. 5; 2015 ISSN 1913-9004 E-ISSN 1913-9012 Published by Canadian Center of Science and Education How Does Packaging Influence Consumer Behavior? A Multidisciplinary Bibliometric Study Kelly Carvalho Vieira1, Valderí Castro Alcantara1, JoséWiller do Prado1, Cintia Loos Pinto2 & Daniel de Carvalho de Rezende3 1 Programa de Pó s-Graduaç o em Administraç o da Universidade Federal de Lavras (UFLA), Brazil ã ã 2 Institute of Humanities Sciences-Florestal, UFV/CAF-Universidade Federal de Viç osa, Campus Florestal, Minas Gerais, Brazil 3 Departamento de Administraç o e Economia da Universidade Federal de Lavras (UFLA), Minas Gerais, Brazil ã Correspondence: Valderíde Castro Alcantara, Programa de Pó s-Graduaç o em Administraç o da Universidade ã ã Federal de Lavras (UFLA), Brazil. E-mail: valderi.alcantara@posgrad.ufla.br Received: February 3, 2015 Accepted: March 5, 2015 Online Published: April 25, 2015 doi:10.5539/ibr.v8n5p66 URL: http://dx.doi.org/10.5539/ibr.v8n5p66 Abstract The objective of this research was to analyze the academic literature focusing on how product packaging influences consumer behavior through the use of a bibliometric study. To accomplish this, we analyzed 111 articles, published from 1982 to 2014, indexed in the Web of Science database maintained by Thomson Reuters (formerly the ISI Web of Knowledge). For the analysis, we used descriptive statistics,......

Words: 8741 - Pages: 35

Banking Management - What Are the Advantages of Packaging Illustrate in Banking Context

...Need Answer Sheet of this Question paper, contact aravind.banakar@gmail.com www.mbacasestudyanswers.com ARAVIND – 09901366442 – 09902787224 Banking Management CASE-01: BANKING ON RELATIONSHIP The birth of ABC Bank took place after the RBI issued guidelines for the entry of new private sector banks in January 1993. Subsequently, the promoter of ABC Bank sought permission to establish a commercial bank and retained KPMG, a management consultant of international repute, to prepare the groundwork for establishing a commercial bank. The Reserve Bank of India conveyed its approval in principle to establish ABC Bank on February 11, 1994. Thereafter, the Bank was incorporated under The Companies Act in September 1994. The bank started its operations in November 1995. The ABC Bank was promoted by the tenth largest development bank in the world, which had a magnificent record of promoting world-class institutions in India. The promoter was a strategic investor in a plethora of institutions, which had revolutionized the Indian financial markets. QUESTIONS FOR DISCUSSION 1. Analyze the case, using SWOT. 2. Comment on the strategies used by the bank for penetrating the Nagpur market. 3. Suggest strategies for sustenance and growth of the bank in view of the changing scenario of the Nagpur region. Section II Answer Any Six: 1. Explain buyers credit and suppliers credit by giving examples of each type of credit. Also explain with a......

Words: 778 - Pages: 4

Packaging Management - 3mâ€Tms Scotch Brand Tm Stretchable Tape (St) Is a 4 or 6 Mil Linear Low

...09901366442 – 09902787224 PACKAGING MANAGEMENT Attempt any four cases Case No 1 Stretchable Tape 3Mâ€TMs Scotch Brand TM Stretchable Tape (ST) is a 4 or 6 mil Linear Low Density Polyethylene (LLDPE) backing with a solvent less adhesive. ST is a load stabilization product which can provide reductions in raw materials and waste disposal costs while maintaining a stable, breathable load. ST utilizes 3Mâ€TM5 patented Stretch Release adhesive technology which will not damage high intensity graphic boxes. 3Mâ€TMs Scotch Brand TM Stretchable Tape was tested and proven to conform, by an Independent Testing Facility, to ASTM D4 169–Standard Practice for Performance Testing of Shipping Containers and Systems. Background A meat packing house was packing 48 to 50 lb. of hams into a 10” high box. These boxes were interlock stacked 7 layers high on a 40” x 48” pallet. They were using stretch film and corner boards to stabilize the load for transport to an off site blast freezer. At the blast freezer the stretch film and corner boards were removed to improve cold air flow to the hams and reduce freezing time. After the blast freezer, the pallet was rewrapped with stretch film and corner boards and sent to distribution warehousing. The reason the meat packer is investigating ST is to reduce raw material cost, application cost, and waste disposal cost. Waste and Cost Savings 3M†TMs Stretchable Tape (ST), #8886, was used to stabilize the......

Words: 2250 - Pages: 9

Packaging Management - Analyze the Solution Innovated by 3m

...09901366442 – 09902787224 PACKAGING MANAGEMENT Attempt any four cases Case No 1 Stretchable Tape 3Mâ€TMs Scotch Brand TM Stretchable Tape (ST) is a 4 or 6 mil Linear Low Density Polyethylene (LLDPE) backing with a solvent less adhesive. ST is a load stabilization product which can provide reductions in raw materials and waste disposal costs while maintaining a stable, breathable load. ST utilizes 3Mâ€TM5 patented Stretch Release adhesive technology which will not damage high intensity graphic boxes. 3Mâ€TMs Scotch Brand TM Stretchable Tape was tested and proven to conform, by an Independent Testing Facility, to ASTM D4 169–Standard Practice for Performance Testing of Shipping Containers and Systems. Background A meat packing house was packing 48 to 50 lb. of hams into a 10” high box. These boxes were interlock stacked 7 layers high on a 40” x 48” pallet. They were using stretch film and corner boards to stabilize the load for transport to an off site blast freezer. At the blast freezer the stretch film and corner boards were removed to improve cold air flow to the hams and reduce freezing time. After the blast freezer, the pallet was rewrapped with stretch film and corner boards and sent to distribution warehousing. The reason the meat packer is investigating ST is to reduce raw material cost, application cost, and waste disposal cost. Waste and Cost Savings 3M†TMs Stretchable Tape (ST), #8886, was used to stabilize the......

Words: 2250 - Pages: 9

The Power of Packaging

...The Power of Packaging Alice Louw & Michelle Kimber The Customer Equity Company* In recent years packaging has developed well beyond its original function as merely a means of product protection and now plays a key marketing role in developing on shelf appeal, providing product information and establishing brand image and awareness. As packaging’s role in the marketing mix gains momentum, so research into this arena becomes increasingly important. Given the potential for packaging to successfully achieve marketing goals; does research into packaging truly reflects its value within the marketing mix? Do we fully understand the role that packaging plays in a marketing environment and how best to leverage this tool to influence consumers? If packaging is so important, what is the best way to measure its effectiveness? * The Customer Equity Company is a wholly owned subsidiary of TNS (UK) which has been set up to develop the marketing sciences and support brand equity and Commitment modelling worldwide. 1 What is packaging? The definitions of ‘packaging’ vary and range from being simple and functionallyfocused to more extensive, holistic interpretations. Packaging can be defined quite simply as an extrinsic element of the product (Olson and Jacoby (1972)) - an attribute that is related to the product but does not form part of the physical product itself. “Packaging is the container for a product – encompassing the physical appearance of the container and......

Words: 8563 - Pages: 35

Management Information Systems

...ısManagement Information Systems, 12E Laudon & Laudon Chapter 1 Information Systems in Global Business Today Computers are changing every aspect of our lives from entertainment to shopping, from the work we do and where we do it, to how we communicate with friends and relatives. Networking technologies are pervading almost everything we do professionally, socially, and recreationally. As you can see from the opening case in the text, many companies are remodeling their businesses and information systems with the Internet in mind. It has become more important than ever for you to understand not just how technology works but also how current and future advances affect your work life. 1.1 The Role of Information Systems in Business Today Ask managers to describe their most important resources and they‘ll list money, equipment, materials, and people — not necessarily in that order. It‘s very unusual for managers to consider information an important resource, and yet it is. As electronic business and electronic commerce grow in popularity and more firms digitize their operations, having useful information is becoming even more important to the global business community. This chapter gives you an overview of many of the subjects we‘ll touch on in this course. It will help you understand how all firms today, large and small, local and global, use information systems to achieve important business objectives, such as operational efficiency, customer and supplier intimacy,......

Words: 12577 - Pages: 51