Operations Management - a Manufacturer of Motorcycles Buys Spark Plugs at Rs.15 Each. Now He Wishes to Manufacture the Plugs in His Own Factory

In: Other Topics

Submitted By casestudyhelp365
Words 668
Pages 3
Need Answer Sheet of this Question paper, contact aravind.banakar@gmail.com www.mbacasestudyanswers.com
ARAVIND – 09901366442 – 09902787224

OPERATIONS MANAGEMENT

CASE-1 (16 Marks)

Bloomsday Outfitters produces T-shirts for road races. They need to acquire some new stamping machines to produce 30,000 good T-shirts per month. Their plant operates 200 hours per month, but the new machines will be used for T-shirts only 60 percent of the time and the output usually includes 5 percent that are "seconds" and unusable. The stamping operation takes 1 minute per T-shirt, and the stamping machines are expected to have 90 percent efficiency considering adjustments, changeover of patterns, and unavoidable downtime. How many stamping machines are required?

CASE-2 (16 Marks)
In the table given below the Distribution Manager is expected to service these DCs as per the demands placed. If the actual sales after completing week one is as follows, what would be the quantities that would need amendment as far as Distribution Manager is concerned to service for week two and onwards?
After week one the actual sales to Forecasted sales for week one ratio is as under: Mumbai did 80 % of forecast , Lucknow did 75 % of forecast Kolkata did 60 % of week one forecast Chennai did 125 % of forecast and Delhi did 150 % of week one forecast

CASE-3 (16 Marks)
After working for 30 years, Ramjee Somjee Dutt opted for VRS and started a courier company and did very well in the first four years. He was now looking for expansion of his business and decided to venture into Road transportation business between Chennai and Mumbai and Mumbai and Delhi as he felt that he could do well on this line. However before taking a final decision he hires your Management Consultant firm formed by yourself. He has requested you to work out the Price to quote his clients for these two routes…...

Similar Documents

Plugs

...to Change Spark Plugs Is that car of yours not running right? Losing in power and acceleration? Or do you just want more life out of your engine? The best way to get all of this is routine maintenance, but it normally cost a large sum of money! Well, here is something you can do yourself that will get you power, acceleration and more life out of that engine. Changing your own spark plugs. This is how you git-r-done. First, check your owner’s manual to find out what kind of engine you have. This will tell you how many spark plugs are needed. Then you can start to gather the things you will need to get the job done. Go to your local auto part store. Tell the clerk what you know so far and he will get you what you need. This is also a good time to get the tools if you don’t have them. You will need a ratchet, ratchet extension, chalk, spark plug grease, proper size socket and a cold drink is all you will need. Now that you have all the tools and supplies, it’s time to get to work. Removing the spark plugs is simple task. Locate the spark plug wires. Pick a spark plug wire to start with. Next, remove that wire from the plug with a little tug. Then, mark the wire and area close to that spark plug with the chalk. They should be similar markings per pair a simple 1, 2, 3 type of order will work fine. After, you have done one set, repeat the removing marking process for the remaining spark plugs and wires. Make sure that each wire has the same number marking as the plug it was......

Words: 748 - Pages: 3

Tire Manufacturer

...For the exclusive use of C. SULLIVAN Harvard Business School 9-391-095 Rev. April 18, 1995 Cooper Industries’ Corporate Strategy (A) The business of Cooper is value-added manufacturing. – Cooper Industries’ management philosophy Manufacturing may not be glamorous, but we know a lot about it. – Robert Cizik, Chairman, President and CEO Cooper Industries, a company more than 150 years old, spent most of its history as a small but reputable maker of engines and compressors to propel natural gas through pipelines. In the 1960s, the firm’s leaders decided to expand the company to lessen its dependence on the capital expenditures of the cyclical natural gas business. During the next 30 years, the company acquired more than 60 manufacturing companies that dramatically increased the size and scope of Cooper Industries (Exhibits 1 and 2). Through a process that both insiders and outsiders called “Cooperization,” the company welded a group of “independent, over-the-hill companies into a highly efficient, profitable, competitive business.”1 By 1988, the diversified industrial products company derived $4.3 billion in annual revenues from manufacturing 2 million items. Cooper’s products ranged from 10¢ fuses to $3 million turbine compressor sets marketed under an array of brand names, the most famous of which was Crescent wrenches. “We decided a long time ago,” said Robert Cizik, chairman, president, and CEO, “that if we could do an outstanding job at the unglamorous part by making......

Words: 12792 - Pages: 52

Operations Management

...be emailed to rights@newagepublishers.com ISBN (13) : 978-81-224-2883-4 PUBLISHING FOR ONE WORLD NEW AGE INTERNATIONAL (P) LIMITED, PUBLISHERS 4835/24, Ansari Road, Daryaganj, New Delhi - 110002 Visit us at www.newagepublishers.com PREFACE Operations management has been recognised as an important factor in a country’s economic growth. The traditional view of manufacturing management is the concept of Production Management with the focus on economic efficiency in manufacturing. Later the new name Operations Management was identified, as service sector became more prominent. Rapid changes in technology have posed numerous opportunities and challenges, which have resulted in enhancement of manufacturing capabilities through new materials, facilities, techniques and procedures. Hence, managing a service system has become a major challenge in the global competitive environment. Operations Management has been a key element in the improvement and productivity in business around the world. Operations Management leads the way for the organisations to achieve its goals with minimum effort. Hence, the study of the subject at undergraduate and postgraduate level has more significance. This book on ‘Operations Management’ covers the complete syllabus of Bachelor of Engineering of Visvesvaraya Technical University, Karnataka, however the coverage is wide enough to include the requirements of Bachelor and Master Degree courses of other Indian universities and professional......

Words: 99597 - Pages: 399

Siemens Plc Load Management

...1. Abstract: Man is an ambitious creator. He has conquered the world of science and has reached to this 21ST century. In pre-cuts of perfection, He has cared much for automation and product quality which is directly co related to electronics. In this fact developing society, electronic has come to stay as the most important branch of Engineering. Electronic devices are being used in almost all the industries for quality control and automation. They have become a fast replacement of present workers army which is engaged in processing and assembling of the factory. In this fact developing society, electronic has come to stay as the most important branch of Engineering. Electronic devices are being used in almost all the industries for quality control and automation. They have become a fast replacement of present workers army which is engaged in processing and assembling of the factory. 2. Problem statement: The objective of this project is to make a device with the help of PLC which can control automatically the devices connected with it, the PLC we are using is Siemens LOGO module, we control the street light, home appliances, Lamp Flasher, and star delta starter. The PLC helps us in automatic control of devices with its output signal; we can also provide the time delay using timers. 1 3. Purpose of the Project: An engineer discovers new ideas and identifies opportunities in various sectors of national economy. He explores the possibilities of starting adventures......

Words: 5909 - Pages: 24

Plug Plot

...evidence for the causes of the Plug Plot disturbances in 1842. Both sources B and D have a shared view on the fact that many people were provoked by the reduction of wages made by their employers which they believed to be deliberate as without the correct finances they were unable to survive and provide for their families. This was one of the main reasons why the rebelled against the poor factory conditions as employers thought it was vital to reduce wages so that they could succeed with their plan of the Anti Corn Law. Source B states ‘Thousands stopped work, forcing all to join them’. They did so because of a reduction in wages, almost without notice.’ This shows that many employees were desperate to get the governments attention in order for them to get involved and increase labour wages as they had no active involvement where factory workers liberty was concerned. Source D also agrees with this at it too states ‘The Plug Plot of 1842 began with reductions of wages’ hence why many people in 1842 rebelled, in some cases, striking workers stopped production by removed the boiler plugs from the steam engines in their factories. The Anti Corn Law was first introduced in Britain in 1804, when the landowners wanted to protect their profits by imposing a duty on imported corn. Source B also states ‘This was taken as the intention of employers everywhere.’ This shows how many workers were affected by these cut backs which could have caused the plug plot disturbances as many......

Words: 909 - Pages: 4

Supply Chain Management Term Paper

...Supply Chain Management Final Paper Name: Student ID: Instructor: [Abstract] With the updates of music carriers, the market of headsets expanded quickly. Using the in-ear headsets as a sample product, this paper works on the requirements, souring, logistics, sustainability and costs of the product, and finally works out a supply chain for this product. [Keywords] Supply chain management, headsets Overview Product introduction I choose customized in-ear headsets (or earbuds) as my product. And my firm will be located in Shanghai, PRC. Several colors and different sound drivers are provided. The type of sound drivers used in the headsets, the appearance of the shells and the cable color are determined by customers. Background information As music players get smaller and smaller today, people found there’s no more space for the convenience promotion of music carriers. Thus, customers start to focus on the quality of music they hear. In the past years, the market of earbuds especially those in-ear headsets whose price is over $50 has expanded, and becomes a 10-billion trade. I’m quite interested in audio products and this idea came out when I was looking for a new earphone on some e-stores. That moment I was browsing the official site of Ultimate Ears, the very famous brand of professional ear monitors, and it’s also well known for its customized in-ear monitors for vocalists. I hope to figure out how this kind of customized-pattern works if it is......

Words: 4874 - Pages: 20

Operations Management

...ePAPER ON “SUPPLY CHAIN MANAGEMENT IN AEROSPACE INDUSTRY” By- GROUP A3 PGPM1013-006- Anshul Maheshwari PGPM1013-043- Rashmi Ranjan Padhi PGPM1013-060- Vamsi Korlepara PGPM1013-082- Keshav Mishra TABLE OF CONTENTS 1. Cover Page………………………………………………………………………………………………….………….………………………………...1 2. Table of Contents………………………………………………………………………………………….…………………………………………..2 3. Executive Summary………………………………………………………………………………………….……………………………………… 3 4. Introduction……………………………………………………………………………………………………….………………………………………4 5. Aerospace Supply Chain Process………………………………………………………………………….…………………………………….5 6. Description of 5 stages………………………………………………………………………………………….…………………………………..6 7. Global Aerospace Supply Chain……………………………………………………………………………….…………………………………7 8. Sourcing in Aerospace Industry………………………………………………………………………………………………………………8-9 9. Need for Supply Chain in Aerospace Industry……………………………………………………………………………………..10-11 10. Major Aircraft components………………………………………………………………………………………………………………………12 11. Supply chain of Boeing components world wide………………………………………………………………………………………15 12. Criterion for adopting Supply Chain strategies…………………………………………………………………………………….17-18 13. Who does it?.......................................................................................................................................19-20 14. What technology enablers are used?........................................................................................

Words: 6892 - Pages: 28

How We Ended Up with 15 Different Kinds of Plugs and Sockets?

...How we ended up with 15 different kinds of plugs and sockets? There is 15 different types of power plugs and sockets in the world and those are named with letters from A to O. Main question is why we have those 15 different types of power plugs instead of one in whole world. All of this plugs works either with 50 Hz frequency or with 60 Hz and the voltage variate between 100 to 240 V. Around 80% of all the countries in the world use voltage between 220 to 240 V and the rest 20% use voltage between 100 to 127 V. Although the biggest user of lower voltage United States of America has started to use 230 V split in two 115 volts wire and that allows every possible appliance to plug in without concern of braking it. So maybe some point in future we only have one short voltage area. (International Electrotechnical Commission 2015), (H.McGregor 2015). Some history to this point to give a hint why we even end up needing these power plugs and sockets. All of this goes back to man named Joseph Swan who invented incandescent light bulb in 1878 and Thomas Edison who invented indoor light bulb which was huge invention at that time. Light bulb was huge invention at that time people were able to see in the dark house without candles. After many test and disappointments Thomas Edison was able to create lamp that lasted 13,5 hours 22nd of October in 1879 and he filed a patent for it and so it was the first commercial incandescent light bulb. After patenting the light bulb Thomas develop......

Words: 4055 - Pages: 17

Strategic Management

...The Basic Framework for Strategy Analysis A Brief History of Business Strategy Strategy Today How Is Strategy Made? The Strategy Process Strategic Management of Not-For-Profit Organizations 3 8 10 13 19 21 Part 2: THE TOOLS OF STRATEGY ANALYSIS 2 2.1 2.2 2.3 2.4 3 3.1 3.2 3.3 3.4 3.5 3.6 4 4.1 4.2 4.3 5 5.1 5.2 5.3 5.4 6 6.1 6.2 6.3 Goals, Values, and Performance Strategy as a Quest for Value Putting Performance Analysis into Practice Beyond Profit: Values and Corporate Social Responsibility Beyond Profit: Strategy and Real Options Industry Analysis: The Fundamentals From Environmental Analysis to Industry Analysis Analyzing Industry Attractiveness Applying Industry Analysis to Forecasting Industry Profitability Using Industry Analysis to Develop Strategy Defining Industries: Where to Draw the Boundaries From Industry Attractiveness to Competitive Advantage: Identifying Key Success Factors Further Topics in Industry and Competitive Analysis Extending the Five Forces Framework Dynamic Competition: Hypercompetition, Game Theory, and Competitor Analysis Segmentation and Strategic Groups Analyzing Resources and Capabilities The Role of Resources and Capabilities in Strategy Formulation Identifying Resources and Capabilities Appraising Resources and Capabilities Developing Strategy Implications Organization Structure and Management Systems: The Fundamentals of Strategy Implementation From Strategy to Execution Organizational Design: The Fundamentals of......

Words: 357444 - Pages: 1430

Operations Management

..."seconds" and unusable. The stamping operation takes 1 minute per T-shirt, and the stamping machines are expected to have 90 percent efficiency considering adjustments, changeover of patterns, and unavoidable downtime. How many stamping machines are required? CASE-2 (16 Marks) In the table given below the Distribution Manager is expected to service these DCs as per the demands placed. If the actual sales after completing week one is as follows, what would be the quantities that would need amendment as far as Distribution Manager is concerned to service for week two and onwards? After week one the actual sales to Forecasted sales for week one ratio is as under: Mumbai did 80 % of forecast , Lucknow did 75 % of forecast Kolkata did 60 % of week one forecast Chennai did 125 % of forecast and Delhi did 150 % of week one forecast AN ISO 9001 : 2008 CERTIFIED INTERNATIONAL B-SCHOOL Note : Kolkata will receive transit stocks in week 2 . CASE-3 (16 Marks) After working for 30 years, Ramjee Somjee Dutt opted for VRS and started a courier company and did very well in the first four years. He was now looking for expansion of his business and decided to venture into Road transportation business between Chennai and Mumbai and Mumbai and Delhi as he felt that he could do well on this line. However before taking a final decision he hires your Management Consultant firm formed by yourself. He has requested you to work out the Price to quote his clients for these two routes......

Words: 648 - Pages: 3

Operations Management - a Company Is Operating in Two Unrelated Businesses. the First One Is Making Common Salt, Which Is Sold in One-Kilogram Consumer Packs

...mbacasestudyanswers.com ARAVIND – 09901366442 – 09902787224 OPERATIONS MANAGEMENT CASE-1 (16 Marks) Bloomsday Outfitters produces T-shirts for road races. They need to acquire some new stamping machines to produce 30,000 good T-shirts per month. Their plant operates 200 hours per month, but the new machines will be used for T-shirts only 60 percent of the time and the output usually includes 5 percent that are "seconds" and unusable. The stamping operation takes 1 minute per T-shirt, and the stamping machines are expected to have 90 percent efficiency considering adjustments, changeover of patterns, and unavoidable downtime. How many stamping machines are required? CASE-2 (16 Marks) In the table given below the Distribution Manager is expected to service these DCs as per the demands placed. If the actual sales after completing week one is as follows, what would be the quantities that would need amendment as far as Distribution Manager is concerned to service for week two and onwards? After week one the actual sales to Forecasted sales for week one ratio is as under: Mumbai did 80 % of forecast , Lucknow did 75 % of forecast Kolkata did 60 % of week one forecast Chennai did 125 % of forecast and Delhi did 150 % of week one forecast CASE-3 (16 Marks) After working for 30 years, Ramjee Somjee Dutt opted for VRS and started a courier company and did very well in the first four years. He was now looking for expansion of his business and decided to venture into......

Words: 668 - Pages: 3

Operations Management - After Week One the Actual Sales to Forecasted Sales for Week One Ratio Is as Under Mumbai Did 80 % of Forecast

...mbacasestudyanswers.com ARAVIND – 09901366442 – 09902787224 OPERATIONS MANAGEMENT CASE-1 (16 Marks) Bloomsday Outfitters produces T-shirts for road races. They need to acquire some new stamping machines to produce 30,000 good T-shirts per month. Their plant operates 200 hours per month, but the new machines will be used for T-shirts only 60 percent of the time and the output usually includes 5 percent that are "seconds" and unusable. The stamping operation takes 1 minute per T-shirt, and the stamping machines are expected to have 90 percent efficiency considering adjustments, changeover of patterns, and unavoidable downtime. How many stamping machines are required? CASE-2 (16 Marks) In the table given below the Distribution Manager is expected to service these DCs as per the demands placed. If the actual sales after completing week one is as follows, what would be the quantities that would need amendment as far as Distribution Manager is concerned to service for week two and onwards? After week one the actual sales to Forecasted sales for week one ratio is as under: Mumbai did 80 % of forecast , Lucknow did 75 % of forecast Kolkata did 60 % of week one forecast Chennai did 125 % of forecast and Delhi did 150 % of week one forecast CASE-3 (16 Marks) After working for 30 years, Ramjee Somjee Dutt opted for VRS and started a courier company and did very well in the first four years. He was now looking for expansion of his business and decided to venture into......

Words: 668 - Pages: 3

Operations Management - After Working for 30 Years, Ramjee Somjee Dutt Opted for Vrs and Started a Courier Company and Did Very Well in the First Four Years

...mbacasestudyanswers.com ARAVIND – 09901366442 – 09902787224 OPERATIONS MANAGEMENT CASE-1 (16 Marks) Bloomsday Outfitters produces T-shirts for road races. They need to acquire some new stamping machines to produce 30,000 good T-shirts per month. Their plant operates 200 hours per month, but the new machines will be used for T-shirts only 60 percent of the time and the output usually includes 5 percent that are "seconds" and unusable. The stamping operation takes 1 minute per T-shirt, and the stamping machines are expected to have 90 percent efficiency considering adjustments, changeover of patterns, and unavoidable downtime. How many stamping machines are required? CASE-2 (16 Marks) In the table given below the Distribution Manager is expected to service these DCs as per the demands placed. If the actual sales after completing week one is as follows, what would be the quantities that would need amendment as far as Distribution Manager is concerned to service for week two and onwards? After week one the actual sales to Forecasted sales for week one ratio is as under: Mumbai did 80 % of forecast , Lucknow did 75 % of forecast Kolkata did 60 % of week one forecast Chennai did 125 % of forecast and Delhi did 150 % of week one forecast CASE-3 (16 Marks) After working for 30 years, Ramjee Somjee Dutt opted for VRS and started a courier company and did very well in the first four years. He was now looking for expansion of his business and decided to venture into......

Words: 668 - Pages: 3

Operations Management - Bloomsday Outfitters Produces T-Shirts for Road Races. They Need to Acquire Some New Stamping Machines to Produce 30,000 Good T-Shirts Per Month

...mbacasestudyanswers.com ARAVIND – 09901366442 – 09902787224 OPERATIONS MANAGEMENT CASE-1 (16 Marks) Bloomsday Outfitters produces T-shirts for road races. They need to acquire some new stamping machines to produce 30,000 good T-shirts per month. Their plant operates 200 hours per month, but the new machines will be used for T-shirts only 60 percent of the time and the output usually includes 5 percent that are "seconds" and unusable. The stamping operation takes 1 minute per T-shirt, and the stamping machines are expected to have 90 percent efficiency considering adjustments, changeover of patterns, and unavoidable downtime. How many stamping machines are required? CASE-2 (16 Marks) In the table given below the Distribution Manager is expected to service these DCs as per the demands placed. If the actual sales after completing week one is as follows, what would be the quantities that would need amendment as far as Distribution Manager is concerned to service for week two and onwards? After week one the actual sales to Forecasted sales for week one ratio is as under: Mumbai did 80 % of forecast , Lucknow did 75 % of forecast Kolkata did 60 % of week one forecast Chennai did 125 % of forecast and Delhi did 150 % of week one forecast CASE-3 (16 Marks) After working for 30 years, Ramjee Somjee Dutt opted for VRS and started a courier company and did very well in the first four years. He was now looking for expansion of his business and decided to venture into......

Words: 668 - Pages: 3

Operation Management

...be emailed to rights@newagepublishers.com ISBN (13) : 978-81-224-2883-4 PUBLISHING FOR ONE WORLD NEW AGE INTERNATIONAL (P) LIMITED, PUBLISHERS 4835/24, Ansari Road, Daryaganj, New Delhi - 110002 Visit us at www.newagepublishers.com PREFACE Operations management has been recognised as an important factor in a country’s economic growth. The traditional view of manufacturing management is the concept of Production Management with the focus on economic efficiency in manufacturing. Later the new name Operations Management was identified, as service sector became more prominent. Rapid changes in technology have posed numerous opportunities and challenges, which have resulted in enhancement of manufacturing capabilities through new materials, facilities, techniques and procedures. Hence, managing a service system has become a major challenge in the global competitive environment. Operations Management has been a key element in the improvement and productivity in business around the world. Operations Management leads the way for the organisations to achieve its goals with minimum effort. Hence, the study of the subject at undergraduate and postgraduate level has more significance. This book on ‘Operations Management’ covers the complete syllabus of Bachelor of Engineering of Visvesvaraya Technical University, Karnataka, however the coverage is wide enough to include the requirements of Bachelor and Master Degree courses of other Indian universities and professional......

Words: 99597 - Pages: 399