Aldi Porter Analysis

In: Business and Management

Submitted By theshadow688
Words 758
Pages 4
Individual Assignment BUS845
This assignment requires you to answer two questions. It should be submitted through Turnitin at the latest 3 pm, Friday, Week 5. For the Turnitin submission – title your document with your full name and student number, e.g., Smith20062007. Turnitin can be found on the unit’s iLearn site
Answer each question separately and make sure your name and student number can be found in the header of each page. Make sure that the answers to the questions are presented on separate pages so that they can be divided for marking purposes (i.e. the answer to question 1 goes to one marker and the answer to question 2 to another).
Your answers should be written in Times New Roman, size 12, single spaced just like this document. You have a maximum of 1000 words per question at your disposal (which corresponds to about two pages per question). The highest marks will be awarded to answers that are: * parsimonious, i.e. the answer is to the point and does not include irrelevant concepts, theory or arguments; * well argued the, i.e. it is easy to follow the logic of the arguments and to see which assumptions they are based upon; * complete, i.e. they do not omit important components; * correct, i.e. the answer addresses the task set in the question and the answer contains no errors; and * well written, i.e. the answers are appropriately structured, clearly expressed and grammatically correct.
You should use additional references to the reading provided so far in the unit. The reference list does not count towards the word limit. On iLearn you can find the Aldi case. This assignment, as well as the group assignment, is based on this case.
It is also advisable to consult the marking criteria on iLearn.
Question 1
The information in the case (Aldi) is not sufficient for making an informed and complete industry analysis based on Porter’s…...

Similar Documents

Michelin Porter Analysis

...Analyse de Porter L’analyse de Porter repose sur l’analyse de cinq éléments : les entrants potentiels, la force de négociation des fournisseurs et des clients, les produits de substitution et l’intensité concurrentielle. L’analyse de Porter a pour but de connaître l’attractivité de l’industrie. Ainsi, dans cette partie, nous nous demanderons si l’industrie du pneumatique est attractive ou non. 1. Entrants potentiels Les entrants potentiels sont surtout les firmes asiatiques qui misent sur le bas de gamme pour venir concurrencer les leaders en place. Mais ont-ils une chance de rivaliser avec ces-derniers ? Pour répondre à cela, il faut s’appuyer sur l’analyse des barrières à l’entrée : * Les économies d’échelles : La production mondiale de pneus est intensive. En effet, elle dépasse 3,1 millions de pneus par jour à savoir plus de 38 pneus par seconde ! En outre on compte 75 sites de production de pneus dans le monde. Dès lors, les économies d’échelles sont conséquentes dans cette industrie. De surcroît, les trois grands leaders de l’industrie pneumatique que sont Michelin, Goodyear et Bridgestone ont opté pour une politique d’acquisition à la fin des années 1980 (Bridgestone a racheté Firestone, Michelin Uniroyal-Goodrich et Goodyear Dunlop). Ils forment également des alliances stratégiques et des joint-ventures ce qui leur permet de réaliser d’importantes économies d’échelle. * L’intensité capitalistique : L’industrie du pneumatique est à forte......

Words: 1401 - Pages: 6

Porter Analysis

...Porter's five forces analysis is a framework for industry analysis and business strategy development formed by Michael E. Porter of Harvard Business School in 1979. It draws upon industrial organization (IO) economics to derive five forces that determine the competitive intensity and therefore attractiveness of a market. Attractiveness in this context refers to the overall industry profitability. An "unattractive" industry is one in which the combination of these five forces acts to drive down overall profitability. A very unattractive industry would be one approaching "pure competition", in which available profits for all firms are driven to normal profit. Three of Porter's five forces refer to competition from external sources. The remainder are internal threats. Porter referred to these forces as the micro environment, to contrast it with the more general term macro environment. They consist of those forces close to a company that affect its ability to serve its customers and make a profit. A change in any of the forces normally requires a business unit to re-assess the marketplace given the overall change in industry information. The overall industry attractiveness does not imply that every firm in the industry will return the same profitability. Firms are able to apply their core competencies, business model or network to achieve a profit above the industry average. A clear example of this is the airline industry. As an industry, profitability is low and yet individual...

Words: 381 - Pages: 2

Porters Analysis

...Porter's 5 Force Analysis Rivalry (High) Rivalry within the Canadian Airlines Industry is relatively high although WestJet and Air Canada are the two largest companies. This is due to various reasons which include difficulties in exiting the company,high levels of demand and price competition. The demand for the industry is huge and its a billion dollar market which airline companies want to control. The Airlines Industry is highly saturated on domestic and international levels which creates high rivarlries. Companies compete through prices, offering various products and customer service. Market Share is created in this market through price competition, so when major company decreases their price many competitors must price match in order to keep the rivalry strong. Also, exiting the industry is highly difficult due to sunk costs and losses during the liquidation process. Buyer Power (High) Buyer Power for this industry is high due to the large number of airlines in the industry. Most consumers are price sensitive which will force most competitors to adapt. This can be done through lowering prices and/or offering different products such as first class, paid in-flight cafe, limo services, etc., to maintain market share. Due to high price sensitivity and the buyers power to switch, many lower class airlines can avidly compete against larger airlines. Buyers can pick and choose which airlines to fly with and that is becoming easier with their ability to quickly compare......

Words: 602 - Pages: 3

Porter Five Forces Analysis

...3/9/13 Porter five forces analysis - Wikipedia, the free encyclopedia Porter five forces analysis From Wikipedia, the free encyclopedia Porter five forces analysis is a framework for industry analysis and business strategy development formed by Michael E. Porter of Harvard Business School in 1979. It draws upon industrial organization (IO) economics to derive five forces that determine the competitive intensity and therefore attractiveness of a market. Attractiveness in this context refers to the overall industry profitability. An "unattractive" industry is one in which the combination of these five forces acts to drive down overall profitability. A very unattractive industry would be one approaching "pure competition", in which available profits for all firms are driven to normal profit. Three of Porter's five forces refer to competition from external sources. The remainder are internal threats. A graphical representation of Porter's Five Forces Porter referred to these forces as the micro environment, to contrast it with the more general term macro environment. They consist of those forces close to a company that affect its ability to serve its customers and make a profit. A change in any of the forces normally requires a business unit to re-assess the marketplace given the overall change in industry information. The overall industry attractiveness does not imply that every firm in the industry will return the same profitability. Firms are able to apply......

Words: 1892 - Pages: 8

Porters 5 Force Analysis

...Porter’s 5 Forces Analysis = Suppliers, Customers, New Entrants, Substitute Products, Competitors What is Porter’s 5 Forces Analysis? Porter’s 5 forces analysis represents the competitive environment of the firm. It is a strategic foresight to avoid putting the competitive edge at risk and ensure the profitability of products on a long term. For the company this vision is quite important because the firm is able to direct its innovations in terms of choice of strategies and investments. The profitability of businesses within the industrial structure depends on the following forces: Competitive rivalry within the industry; Threats of new entrants; Threats of substitutes products; Bargaining power of customers; Bargaining power of suppliers. Golden Rules 6th force = Often the model is adjusted with a 6th force, the public authorities. This is important because the law and the norms can influence each of Porter’s 5 forces. Key factors for success = The key success factors of the environment have to be identified. To have a competitive advantage some strategic elements should be controlled. Threats of new entrants Public Authorities Bargaining power of suppliers Competitive rivalry within the industry Bargaining power of customers Threats of substitute products © Copyright 2008 LUXINNOVATION G.I.E., The National Agency for Innovation and Research in Luxembourg 1/2 Porter’s 5 Forces Analysis = Suppliers, Customers, New Entrants, Substitute......

Words: 594 - Pages: 3

Analysis of Porters 5 Forcers

...>technicalmatters Business strategy India’s cultural and linguistic diversity make the country unique in many ways, so can general management theories be tailored to suit Indian business? I decided to apply the famous “five forces” model, which was designed by Michael Porter, professor of strategy and competitiveness at Harvard University, to give a company insights into the potential profitability of a market and help it form its strategy accordingly. The first force covered by the analysis framework is the threat of new competition. Unless the barriers to your market are formidable, new players can enter and poach your share of it. If you wish to enter a new market, you want these barriers to be low, of course. If Porter were Indian, he would recognise that factors such as state protectionism and a lack of infrastructure are a greater barrier to entry in India than they are in more developed nations, where market forces are more powerful. This is because governments of emerging economies are usually reluctant to open the doors to new players in many sectors. Even if they do, it’s likely that they will adopt more interventionist policies at a later stage. For example, India’s airline sector is poised for growth, but the fact that it has recently been deregulated makes it more difficult for competitors to develop long-term strategies, because all such strategies will collapse if the government feels that new entrants are threatening its home market. One factor that could......

Words: 1482 - Pages: 6

Porters National Diamond Analysis

...Part 1: Porters National Diamond Analysis 1. Introduction The purpose of this report is to evaluate the attractiveness of Peruvian wine industry. In this report, we will discover the overall competitiveness and investment attractiveness of Peruvian wine industry. Porter’s National Diamond Analysis will be used as a tool to identify the opportunities and threats of Peruvian wine industry. Two-market entry strategy will be identified and recommended. The advantages and limitations of both strategies will also be discussed in this report. Peru is located in the west of South America, and has borders with Ecuador, Colombia, Brazil, Bolivia and Chile (peru.travel) Wine industry from Peru was brought from Spain after its conquest. (Ayala) 1. 2. Factor conditions 1. 2.1. Physical resources Peru soils are nearly level to steep. They are on drumlins and sloping to steep areas of glaciated uplands. Slope ranges from 0 to 35 percent. The soils formed in dense, loamy glacial till of Wisconsin age that is derived mainly from mica schist, granite, and phyllite. Peru soils are moderately well drained. Permeability is moderate in the solum and moderately slow or slow in the substratum. The climate is humid and cool temperate. Mean annual rainfall ranges from 30 to 50 inches and mean annual air temperature ranges from 40 to 47 degrees Fahrenheit. The frost-free season ranges from 90 to 160 days.(National Cooperative Soil Survey , 2013) The high relief and steep slopes of the streams...

Words: 3878 - Pages: 16

Porter Airlines Strategic Analysis

...Executive Summary Porter Airlines, a short-haul commercial airliner established in 2002, have enjoyed significant and steady growth since inception. The concern now is to devise a solution that will allow Porter to continue its controlled expansion strategy, as it has been so successful and integral to the growth of the company over the past several years. Situation Analysis Porter Airlines operates in a fiercely competitive airline industry, where competitors compete based on price, service, and comfort of passengers, and frequently engages in predatory practices to squeeze out smaller players in the market. The performance of the company depends on external environment factors, such as economic factors of oil and fare prices that will influence margins, or political factors impacting the future bridge and accessibility improvements to the city center airport. Porter’s competitive advantage is linked to the convenience of the Toronto City Center Airport, such as proximity to business core and expedited security and check-in times. Additionally, a critical success factor for Porter is to maintain the commercial exclusivity on the airport, to take advantage of cost savings as a result of being the owner, tenant, and operator. Competitive advantage is also a result of operating a single class of aircraft that has significant cost and operational efficiencies. Alternatives and Recommendation ------------------------------------------------- Several alternatives were......

Words: 3097 - Pages: 13

Porter Analysis

...Porter’s Analysis Porter’s analysis frequently used to identify an industry’s structure in order to determine corporate strategy and helps determine an industry’s weaknesses and strengths. Porter’s model can be applied to any segment of the economy to search for profitability and attractiveness. The five forces identified are industry rivalry, threat of entry, bargaining power of suppliers, bargaining power of buyers and threat of substitutes. These forces determine an industry structure and the level of competition in that industry. The stronger competitive forces in the industry are the less profitable it is. An industry with low barriers to enter, having few buyers and suppliers but many substitute products and competitors will be seen as very competitive and thus, not so attractive due to its low profitability. Rivalry among existing competitors or our industry rivalry – this force is the major determinant on how competitive and profitable an industry is. In competitive industry, firms have to compete aggressively for a market share, which results in low profits. Threat of new entry – this force determines how easy (or not) it is to enter a particular industry. If an industry is profitable and there are few barriers to enter, rivalry soon intensifies. When more organizations compete for the same market share, profits start to fall. It is essential for existing organizations to create high barriers to enter to deter new entrants. Bargaining power of......

Words: 378 - Pages: 2

Porter Analysis

...gender and income. This ensues they have a wide-ranging perspective on consumer trends and knowledge of how future choices are made by consumers. B. Ford’s business unit strategy would be differentiation. It states that Ford is focused on three strategic priorities including accelerating the pace of progress for their One Ford plan (one team, one plan, one goal), delivering product excellence with passion, and driving innovation in each part of their business. They fee, they are innovative and risk takers to a comfortable level. They consider themselves a technological leader and are always looking ahead and developing affordable, accessible solutions to help meet the needs of future transportation industry. C. Porter’s Five Forces Analysis Ford holds weekly business plan review meetings to review all elements of the business with senior management representing all business units. There are special review processes, scorecard reviews and general risk assessments done on a regular basis as well. New entrants This industry has a very high barrier to entry mark. There are substantial fixed costs, existing brand names, and dealership models nearly impossible to mimic, as with Ford, are highly recognizable and hard to compete against. Ford does not view new entrants as a threat when assessing their business risks. Substitute products Public transportation may be viewed as a substitute for their product and as oil prices rise and fall, as well as fuel costs, the......

Words: 901 - Pages: 4

Porter 5 Analysis

...MANAGERIAL SKILLS and STRATEGIC LEADERSHIP ANALYSIS OF SISECAM-TRAKYACAM and FLAT GLASS INDUSTRY OF EUROPE BY PORTER 5 FORCES MODEL Trakya cam has been established in 1978 under SİSECAM Group in order to feed local market and wordwide demands of Flat glass , Automotive glass, Solarglass and Home appliance glasses. Over % 80 of Flat glass is being used for construction and rest is used for other apliane like Solar, automative and Home appliances Trakya cam operates with 4 float lines in Turkey and 2 lines in Bulgaria and it is in the top 5 companies in the World. Threat of New Entrants /Potential Competitors –Low Pressure The major competition is between Asahi Glass, NSG/Pilkington, Saint Gobain, Guardian and Sisecam. The establishment of a new float line costs approximately between 70 mil. € and 200 mil. € according to the size and also demands upgrades and repairs with a cost of 50 mil € during its lifepan of nearly 15 years. This huge investment keeps the new entry barriers relatively high. This condtion is also keeping the major competition between the top 5 companies continuously. Threat of Substitude Products-Low Pressure There is no substitude of flat glasses. In some appliances plastic can be used but it can not be a called a substitude because of the very low apllicabilty level . The Bargaining Power of Buyers- Medium Pressure % 70 of the flat is sold to processors whose process and sells the to the individual buyers. Since the flat glass......

Words: 433 - Pages: 2

Aldi Stakeholders Analysis

...different tasks. Job monitoring, involves providing the staff with an expert person called coach or mentor and this coach provides advice and instruction but that is not performing the job. The trainee learns the job on the first and he or she will assisted by the coach at any time for consult or advice. P. Nick Blanchard., & James W. Thacker, (2003). 3. Example I visited the Department of Training and Development in Al Nahdha Hospital. This department works under supervision of and responsible to the Executive Director. The Department headed by Ms. Nada Al Jardani with strength of six employees. They select the employees for training according to the needs and this will be planned from the beginning of the year by using need analysis to determine the need requirement in all departments then divide the employees in to three levels: individual, department and institutional. * Individual, divided into administration program and clinical program * Department training( the training will be within the department and relating to that department only) * Group or institution, this training program related to all employees The department provide the training to all hospital staff whether clinical or admin staff. The aim of training in this hospital is to improve employee’s knowledge, skills and attitude. The followings are the training resources and material used in this department: 1. Courses 2. Workshops 3. Bed Sid Teaching 4.......

Words: 2534 - Pages: 11

Porter Five Analysis

...Hold 13 13 13 12 Underperform 1 1 1 1 Sell 0 0 0 0 jdlasKF;DAS 16 Cons to Recommendation Ratio Analysis R Ratio Analysis Profitability Ratios Profit margin Gross margin ROA ROE 2010 20.5% 45.8% 15.5% 33.8% 2011 2012 20.4% 19.8% jdlasKF;DAS 56.6% 56.3% 16.7% 15.4% 38.2% 35.7% Yum 2012 BKW 2012 SBUX 10.58% 71.58% 17.90% 48.45% 5.99% 64.80% 2.11% 10.52% 10.50% 57.35% 14.29% 29.45% 2012 Liquidity Ratios Current Quick 1.49 1.46 1.25 1.22 1.45 1.41 0.87 0.49 2.24 1.82 1.85 1.14 1.18 2.18 1.29 2.29 1.31 2.31 66.4 4.49 59.21 5.02 77.4 1.64 0.75 118.83 0.82 100.28 0.78 98.94 1.02 13.22 0.35 N/A 1.71 5.27 P/E 15.4x 15.9x 17.3x 19.49 31.62 19.3 Price/Book Price/Cash Flow 5.6x 12.9x 7.2x 14.5x 6.3x 13.8x 13.55 13.01 4.9 25.62 7.7 62 10.58% 1.02 4.49 48.45% 5.99% 0.35 5.02 10.52% 10.50% 1.71 1.64 29.45% Debt Utilization Debt to Equity Leverage Asset Utilization Asset Turnover Inventory Turnover Valuation Ratios DuPont Analysis Profit Margin Asset Turnover Leverage ROE 20.5% 0.75 2.18 33.8% 20.4% 19.8% 0.82 0.78 2.29 2.31 38.2% 35.7% ATIO ANALYSIS Profitability Ratios McDonald’s is leading the industry with regards to profit margins. It went slightly down in 2012 because of the slight......

Words: 5502 - Pages: 23

Porter Five Forces Analysis

...Porter's five forces analysis is a framework for industry analysis and business strategy development formed by Michael E. Porter of Harvard Business School in 1979. It draws upon industrial organization (IO) economics to derive five forces that determine the competitive intensity and therefore attractiveness of a market. Attractiveness in this context refers to the overall industry profitability. An "unattractive" industry is one in which the combination of these five forces acts to drive down overall profitability. A very unattractive industry would be one approaching "pure competition", in which available profits for all firms are driven to normal profit. Three of Porter's five forces refer to competition from external sources. The remainder are internal threats. Porter referred to these forces as the micro environment, to contrast it with the more general term macro environment. They consist of those forces close to a company that affect its ability to serve its customers and make a profit. A change in any of the forces normally requires a business unit to re-assess the marketplace given the overall change in industry information. The overall industry attractiveness does not imply that every firm in the industry will return the same profitability. Firms are able to apply their core competencies, business model or network to achieve a profit above the industry average. A clear example of this is the airline industry. As an industry, profitability is low and yet......

Words: 298 - Pages: 2

5 Porter Analysis Nokia

...5 FORCES ANALYSIS The economic structure of an industry is not an accident. Its complexities are the result of long-term social trends and economic forces. But its effects on you as a business manager are immediate because it determines the competitive rules and strategies you are likely to use. Learning about that structure will provide essential insight for your business strategy. Michael Porter has identified five forces that are widely used to assess the structure of any industry. Porter’s five forces are the: In a simple word, we can define that the Threat of new competition is a profitable markets that yield high returns will attract new firms. This results in many new entrants, which eventually will decrease profitability for all firms in the industry. Unless the entry of new firms can be blocked by incumbents, the abnormal profit rate will tend towards zero (perfect competition). Threat of substitute products or services is the existence of products outside of the realm of the common product boundaries increases the propensity of customers to switch to alternatives. Note that this should not be confused with competitors' similar products but entirely different ones instead. Bargaining power of customers (buyers) is the bargaining power of customers is also described as the market of outputs: the ability of customers to put the firm under pressure, which also affects the customer's sensitivity to price changes. Bargaining power of suppliers is the bargaining......

Words: 605 - Pages: 3